Skip to main content
Version: 3.13
    Features and pricing

    Getting Started with Helm Charts (ScalarDL Ledger and Auditor with TLS / Auditor Mode)

    This tutorial explains how to get started with ScalarDL Ledger and ScalarDL Auditor with TLS configurations by using Helm Charts on a Kubernetes cluster as a test environment. Before starting, you should already have a Mac or Linux environment for testing. In addition, although this tutorial mentions using minikube, the steps described should work in any Kubernetes cluster.

    Requirements​

    • You need to have a license key (trial license or commercial license) for ScalarDL. If you don't have a license key, please contact us.
    • You need to use ScalarDL 3.9 or later, which supports TLS.
    note

    To make Byzantine fault detection with auditing work properly, ScalarDL Ledger and ScalarDL Auditor should be deployed and managed in different administrative domains. However, in this tutorial, we will deploy ScalarDL Ledger and ScalarDL Auditor in the same Kubernetes cluster to make the test easier.

    What you'll create​

    In this tutorial, you'll deploy the following components on a Kubernetes cluster in the following way:

    +-----------------------------------------------------------------------------------------------------------------------------+
    | [Kubernetes Cluster]                                                                                                        |
    |                                             [Pod]                                      [Pod]                   [Pod]        |
    |                                                                                                                             |
    |                                           +-------+                                 +---------+                             |
    |                                     +---> | Envoy | ---+                      +---> | Ledger  | ---+                        |
    |                                     |     +-------+    |                      |     +---------+    |                        |
    |                                     |                  |                      |                    |                        |
    |                      +---------+    |     +-------+    |     +-----------+    |     +---------+    |     +---------------+  |
    |                +---> | Service | ---+---> | Envoy | ---+---> |  Service  | ---+---> | Ledger  | ---+---> |  PostgreSQL   |  |
    |                |     | (Envoy) |    |     +-------+    |     | (Ledger)  |    |     +---------+    |     | (For Ledger)  |  |
    |                |     +---------+    |                  |     +-----------+    |                    |     +---------------+  |
    |    [Pod]       |                    |     +-------+    |                      |     +---------+    |                        |
    |                |                    +---> | Envoy | ---+                      +---> | Ledger  | ---+                        |
    |  +--------+    |                          +-------+                                 +---------+                             |
    |  | Client | ---+                                                                                                            |
    |  +--------+    |                          +-------+                                 +---------+                             |
    |                |                    +---> | Envoy | ---+                      +---> | Auditor | ---+                        |
    |                |                    |     +-------+    |                      |     +---------+    |                        |
    |                |                    |                  |                      |                    |                        |
    |                |     +---------+    |     +-------+    |     +-----------+    |     +---------+    |     +---------------+  |
    |                +---> | Service | ---+---> | Envoy | ---+---> |  Service  | ---+---> | Auditor | ---+---> |  PostgreSQL   |  |
    |                      | (Envoy) |    |     +-------+    |     | (Auditor) |    |     +---------+    |     | (For Auditor) |  |
    |                      +---------+    |                  |     +-----------+    |                    |     +---------------+  |
    |                                     |     +-------+    |                      |     +---------+    |                        |
    |                                     +---> | Envoy | ---+                      +---> | Auditor | ---+                        |
    |                                           +-------+                                 +---------+                             |
    |                                                                                                                             |
    +-----------------------------------------------------------------------------------------------------------------------------+

    You'll also create the following private key and certificate files for TLS connections.

                                                            +----------------------+
                                                      +---> | For Scalar Envoy     |
                                                      |     +----------------------+
                                                      |     | envoy-key.pem        |
                                                      |     | envoy.pem            |
                                                      |     +----------------------+
                                                      |     
    +----------------------+                          |     +----------------------+
    | Self-signed CA       | ---(Sign certificates)---+---> | For ScalarDL Ledger  |
    +----------------------+                          |     +----------------------+
    | ca-key.pem           |                          |     | ledger-key.pem       |
    | ca.pem               |                          |     | ledger.pem           |
    +----------------------+                          |     +----------------------+
                                                      |     
                                                      |     +----------------------+
                                                      +---> | For ScalarDL Auditor |
                                                            +----------------------+
                                                            | auditor-key.pem      |
                                                            | auditor.pem          |
                                                            +----------------------+

    You'll set each private key and certificate file as follows to enable TLS in each connection.

                                                                         +--------------------------------+      +--------------------------------+
                                          +-------(Normal request)-----> | Envoy for ScalarDL Ledger      | ---> | ScalarDL Ledger                |
                                          |                              +--------------------------------+      +--------------------------------+
                                          |   +---(Recovery request)---> | envoy-key.pem                  | ---> | ledger-key.pem                 |
                                          |   |                          | envoy.pem                      |      | ledger.pem                     |
                                          |   |                          | ca.pem (to verify ledger.pem)  |      | ca.pem (used for health check) |
                                          |   |                          +--------------------------------+      +--------------------------------+
    +--------------------------------+    |   |
    | Client                         | ---+   |
    +--------------------------------+    |   +--------------------------------------------------------------------------------------------------------+
    | ca.pem (to verify envoy.pem)   |    |                                                                                                            |
    +--------------------------------+    |                                                                                                            |
                                          |                              +--------------------------------+      +--------------------------------+    |
                                          +-------(Normal request)-----> | Envoy for ScalarDL Auditor     | ---> | ScalarDL Auditor               | ---+
                                                                         +--------------------------------+      +--------------------------------+
                                                                         | envoy-key.pem                  |      | auditor-key.pem                |
                                                                         | envoy.pem                      |      | auditor.pem                    |
                                                                         | ca.pem (to verify auditor.pem) |      | ca.pem (used for health check) |
                                                                         +--------------------------------+      | ca.pem (to verify ledger.pem)  |
                                                                                                                 +--------------------------------+

    The following connections exist amongst the ScalarDL-related components:

    • Client - Envoy for ScalarDL Ledger: When you execute a ScalarDL API function, the client accesses Envoy for ScalarDL Ledger.
    • Client - Envoy for ScalarDL Auditor: When you execute a ScalarDL API function, the client accesses Envoy for ScalarDL Auditor.
    • Envoy for ScalarDL Ledger - ScalarDL Ledger: Envoy works as an L7 (gRPC) load balancer in front of ScalarDL Ledger.
    • Envoy for ScalarDL Auditor - ScalarDL Auditor: Envoy works as an L7 (gRPC) load balancer in front of ScalarDL Auditor.
    • ScalarDL Auditor - Envoy for ScalarDL Ledger (ScalarDL Ledger): When ScalarDL needs to run the recovery process to keep data consistent, ScalarDL Auditor runs the request against ScalarDL Ledger via Envoy.

    Step 1. Start a Kubernetes cluster and install tools​

    You need to prepare a Kubernetes cluster and install some tools (kubectl, helm, cfssl, and cfssljson). For more details on how to install them, see Getting Started with Scalar Helm Charts.

    Step 2. Start the PostgreSQL containers​

    ScalarDL Ledger and ScalarDL Auditor must use some type of database system as a backend database. In this tutorial, you'll use PostgreSQL.

    You can deploy PostgreSQL on the Kubernetes cluster as follows:

    1. Add the Bitnami helm repository.

      helm repo add bitnami https://charts.bitnami.com/bitnami

    2. Deploy PostgreSQL for Ledger.

      helm install postgresql-ledger bitnami/postgresql \
        --set auth.postgresPassword=postgres \
        --set primary.persistence.enabled=false \
        -n default

    3. Deploy PostgreSQL for Auditor.

      helm install postgresql-auditor bitnami/postgresql \
        --set auth.postgresPassword=postgres \
        --set primary.persistence.enabled=false \
        -n default

    4. Check if the PostgreSQL containers are running.

      kubectl get pod -n default

      [Command execution result]

      NAME                   READY   STATUS    RESTARTS   AGE
      postgresql-auditor-0   1/1     Running   0          11s
      postgresql-ledger-0    1/1     Running   0          16s

    Step 3. Create a working directory​

    You'll create some configuration files and private key and certificate files locally. Be sure to create a working directory for those files.

    1. Create a working directory.

      mkdir -p ${HOME}/scalardl-test/certs/

    Step 4. Create private key and certificate files​

    You'll create private key and a certificate files.

    1. Change the working directory to ${HOME}/scalardl-test/certs/.

      cd ${HOME}/scalardl-test/certs/

    2. Create a JSON file that includes CA information.

      cat << 'EOF' > ${HOME}/scalardl-test/certs/ca.json
      {
          "CN": "scalar-test-ca",
          "key": {
              "algo": "ecdsa",
              "size": 256
          },
          "names": [
              {
                  "C": "JP",
                  "ST": "Tokyo",
                  "L": "Shinjuku",
                  "O": "Scalar Test CA"
              }
          ]
      }
      EOF

    3. Create the CA private key and certificate files.

      cfssl gencert -initca ca.json | cfssljson -bare ca

    4. Create a JSON file that includes CA configurations.

      cat << 'EOF' > ${HOME}/scalardl-test/certs/ca-config.json
      {
          "signing": {
              "default": {
                  "expiry": "87600h"
              },
              "profiles": {
                  "scalar-test-ca": {
                      "expiry": "87600h",
                      "usages": [
                          "signing",
                          "key encipherment",
                          "server auth"
                      ]
                  }
              }
          }
      }
      EOF

    5. Create a JSON file that includes Envoy information.

      cat << 'EOF' > ${HOME}/scalardl-test/certs/envoy.json
      {
          "CN": "scalar-envoy",
          "hosts": [
              "envoy.scalar.example.com",
              "localhost"
          ],
          "key": {
              "algo": "ecdsa",
              "size": 256
          },
          "names": [
              {
                  "C": "JP",
                  "ST": "Tokyo",
                  "L": "Shinjuku",
                  "O": "Scalar Envoy Test"
              }
          ]
      }
      EOF

    6. Create a JSON file that includes ScalarDL Ledger information.

      cat << 'EOF' > ${HOME}/scalardl-test/certs/ledger.json
      {
          "CN": "scalardl-ledger",
          "hosts": [
              "ledger.scalardl.example.com",
              "localhost"
          ],
          "key": {
              "algo": "ecdsa",
              "size": 256
          },
          "names": [
              {
                  "C": "JP",
                  "ST": "Tokyo",
                  "L": "Shinjuku",
                  "O": "ScalarDL Ledger Test"
              }
          ]
      }
      EOF

    7. Create a JSON file that includes ScalarDL Auditor information.

      cat << 'EOF' > ${HOME}/scalardl-test/certs/auditor.json
      {
          "CN": "scalardl-auditor",
          "hosts": [
              "auditor.scalardl.example.com",
              "localhost"
          ],
          "key": {
              "algo": "ecdsa",
              "size": 256
          },
          "names": [
              {
                  "C": "JP",
                  "ST": "Tokyo",
                  "L": "Shinjuku",
                  "O": "ScalarDL Auditor Test"
              }
          ]
      }
      EOF

    8. Create private key and certificate files for Envoy.

      cfssl gencert -ca ca.pem -ca-key ca-key.pem -config ca-config.json -profile scalar-test-ca envoy.json | cfssljson -bare envoy

    9. Create private key and certificate files for ScalarDL Ledger.

      cfssl gencert -ca ca.pem -ca-key ca-key.pem -config ca-config.json -profile scalar-test-ca ledger.json | cfssljson -bare ledger

    10. Create private key and certificate files for ScalarDL Auditor.

      cfssl gencert -ca ca.pem -ca-key ca-key.pem -config ca-config.json -profile scalar-test-ca auditor.json | cfssljson -bare auditor

    11. Confirm that the private key and certificate files were created.

      ls -1

      [Command execution result]

      auditor-key.pem
      auditor.csr
      auditor.json
      auditor.pem
      ca-config.json
      ca-key.pem
      ca.csr
      ca.json
      ca.pem
      envoy-key.pem
      envoy.csr
      envoy.json
      envoy.pem
      ledger-key.pem
      ledger.csr
      ledger.json
      ledger.pem

    Step 5. Create database schemas for ScalarDL Ledger and ScalarDL Auditor by using Helm Charts​

    You'll deploy two ScalarDL Schema Loader pods on the Kubernetes cluster by using Helm Charts. The ScalarDL Schema Loader will create the database schemas for ScalarDL Ledger and Auditor in PostgreSQL.

    1. Change the working directory to ${HOME}/scalardl-test/.

      cd ${HOME}/scalardl-test/

    2. Add the Scalar Helm Charts repository.

      helm repo add scalar-labs https://scalar-labs.github.io/helm-charts

    3. Create a custom values file for ScalarDL Schema Loader for Ledger (schema-loader-ledger-custom-values.yaml).

      cat << 'EOF' > ${HOME}/scalardl-test/schema-loader-ledger-custom-values.yaml
      schemaLoading:
        schemaType: "ledger"
        databaseProperties: |
          scalar.db.contact_points=jdbc:postgresql://postgresql-ledger.default.svc.cluster.local:5432/postgres
          scalar.db.username=${env:SCALAR_DL_LEDGER_POSTGRES_USERNAME}
          scalar.db.password=${env:SCALAR_DL_LEDGER_POSTGRES_PASSWORD}
          scalar.db.storage=jdbc
        secretName: "schema-ledger-credentials-secret"
      EOF

    4. Create a custom values file for ScalarDL Schema Loader for Auditor (schema-loader-auditor-custom-values.yaml).

      cat << 'EOF' > ${HOME}/scalardl-test/schema-loader-auditor-custom-values.yaml
      schemaLoading:
        schemaType: "auditor"
        databaseProperties: |
          scalar.db.contact_points=jdbc:postgresql://postgresql-auditor.default.svc.cluster.local:5432/postgres
          scalar.db.username=${env:SCALAR_DL_AUDITOR_POSTGRES_USERNAME}
          scalar.db.password=${env:SCALAR_DL_AUDITOR_POSTGRES_PASSWORD}
          scalar.db.storage=jdbc
        secretName: "schema-auditor-credentials-secret"
      EOF

    5. Create a secret resource named schema-ledger-credentials-secret that includes a username and password for PostgreSQL for ScalarDL Ledger.

      kubectl create secret generic schema-ledger-credentials-secret \
        --from-literal=SCALAR_DL_LEDGER_POSTGRES_USERNAME=postgres \
        --from-literal=SCALAR_DL_LEDGER_POSTGRES_PASSWORD=postgres \
        -n default

    6. Create a secret resource named schema-auditor-credentials-secret that includes a username and password for PostgreSQL for ScalarDL Auditor.

      kubectl create secret generic schema-auditor-credentials-secret \
        --from-literal=SCALAR_DL_AUDITOR_POSTGRES_USERNAME=postgres \
        --from-literal=SCALAR_DL_AUDITOR_POSTGRES_PASSWORD=postgres \
        -n default

    7. Set the chart version of ScalarDL Schema Loader.

      SCALAR_DL_VERSION=3.9.1
      SCALAR_DL_SCHEMA_LOADER_CHART_VERSION=$(helm search repo scalar-labs/schema-loading -l | grep -F "${SCALAR_DL_VERSION}" | awk '{print $2}' | sort --version-sort -r | head -n 1)

    8. Deploy ScalarDL Schema Loader for ScalarDL Ledger.

      helm install schema-loader-ledger scalar-labs/schema-loading -f ${HOME}/scalardl-test/schema-loader-ledger-custom-values.yaml --version ${SCALAR_DL_SCHEMA_LOADER_CHART_VERSION} -n default

    9. Deploy ScalarDL Schema Loader for ScalarDL Auditor.

      helm install schema-loader-auditor scalar-labs/schema-loading -f ${HOME}/scalardl-test/schema-loader-auditor-custom-values.yaml --version ${SCALAR_DL_SCHEMA_LOADER_CHART_VERSION} -n default

    10. Check if the ScalarDL Schema Loader pods are deployed with the status Completed.

      kubectl get pod -n default

      [Command execution result]

      NAME                                         READY   STATUS      RESTARTS   AGE
      postgresql-auditor-0                         1/1     Running     0          2m56s
      postgresql-ledger-0                          1/1     Running     0          3m1s
      schema-loader-auditor-schema-loading-dvc5r   0/1     Completed   0          6s
      schema-loader-ledger-schema-loading-mtllb    0/1     Completed   0          10s

      If the status of the ScalarDL Schema Loader pods are ContainerCreating or Running, wait for the STATUS column for those pods to show as Completed.

    Step 6. Deploy ScalarDL Ledger and ScalarDL Auditor on the Kubernetes cluster by using Helm Charts​

    1. Set your license key and certificate as environment variables. If you don't have a license key, please contact us. Also, you can see the value of <CERT_PEM_FOR_YOUR_SCALAR_DL_LEDGER_LICENSE_KEY> and <CERT_PEM_FOR_YOUR_SCALAR_DL_AUDITOR_LICENSE_KEY> in our document.

      SCALAR_DL_LEDGER_LICENSE_KEY='<YOUR_SCALAR_DL_LEDGER_LICENSE_KEY>'
      SCALAR_DL_LEDGER_LICENSE_CHECK_CERT_PEM='<CERT_PEM_FOR_YOUR_SCALAR_DL_LEDGER_LICENSE_KEY>'
      SCALAR_DL_AUDITOR_LICENSE_KEY='<YOUR_SCALAR_DL_AUDITOR_LICENSE_KEY>'
      SCALAR_DL_AUDITOR_LICENSE_CHECK_CERT_PEM='<CERT_PEM_FOR_YOUR_SCALAR_DL_AUDITOR_LICENSE_KEY>'

    2. Create a custom values file for ScalarDL Ledger (scalardl-ledger-custom-values.yaml).

      cat << 'EOF' > ${HOME}/scalardl-test/scalardl-ledger-custom-values.yaml
      envoy:

        tls:
          downstream:
            enabled: true
            certChainSecret: "envoy-tls-cert"
            privateKeySecret: "envoy-tls-key"
          upstream:
            enabled: true
            overrideAuthority: "ledger.scalardl.example.com"
            caRootCertSecret: "scalardl-ledger-tls-ca"

      ledger:

        image:
          repository: "ghcr.io/scalar-labs/scalardl-ledger-byol"

        ledgerProperties: |
          ### Storage configurations
          scalar.db.storage=jdbc
          scalar.db.contact_points=jdbc:postgresql://postgresql-ledger.default.svc.cluster.local:5432/postgres
          scalar.db.username=${env:SCALAR_DL_LEDGER_POSTGRES_USERNAME}
          scalar.db.password=${env:SCALAR_DL_LEDGER_POSTGRES_PASSWORD}

          ### Ledger configurations
          scalar.dl.ledger.proof.enabled=true
          scalar.dl.ledger.auditor.enabled=true
          scalar.dl.ledger.authentication.method=hmac
          scalar.dl.ledger.authentication.hmac.cipher_key=${env:SCALAR_DL_LEDGER_HMAC_CIPHER_KEY}
          scalar.dl.ledger.servers.authentication.hmac.secret_key=${env:SCALAR_DL_LEDGER_HMAC_SECRET_KEY}

          ### TLS configurations
          scalar.dl.ledger.server.tls.enabled=true
          scalar.dl.ledger.server.tls.cert_chain_path=/tls/scalardl-ledger/certs/tls.crt
          scalar.dl.ledger.server.tls.private_key_path=/tls/scalardl-ledger/certs/tls.key

          ### License key configurations
          scalar.dl.licensing.license_key=${env:SCALAR_DL_LEDGER_LICENSE_KEY}
          scalar.dl.licensing.license_check_cert_pem=${env:SCALAR_DL_LEDGER_LICENSE_CHECK_CERT_PEM}

        tls:
          enabled: true
          overrideAuthority: "ledger.scalardl.example.com"
          caRootCertSecret: "scalardl-ledger-tls-ca"
          certChainSecret: "scalardl-ledger-tls-cert"
          privateKeySecret: "scalardl-ledger-tls-key"

        secretName: "ledger-credentials-secret"
      EOF

    3. Create a custom values file for ScalarDL Auditor (scalardl-auditor-custom-values.yaml).

      cat << 'EOF' > ${HOME}/scalardl-test/scalardl-auditor-custom-values.yaml
      envoy:

        tls:
          downstream:
            enabled: true
            certChainSecret: "envoy-tls-cert"
            privateKeySecret: "envoy-tls-key"
          upstream:
            enabled: true
            overrideAuthority: "auditor.scalardl.example.com"
            caRootCertSecret: "scalardl-auditor-tls-ca"

      auditor:
        image:
          repository: "ghcr.io/scalar-labs/scalardl-auditor-byol"

        auditorProperties: |
          ### Storage configurations
          scalar.db.storage=jdbc
          scalar.db.contact_points=jdbc:postgresql://postgresql-auditor.default.svc.cluster.local:5432/postgres
          scalar.db.username=${env:SCALAR_DL_AUDITOR_POSTGRES_USERNAME}
          scalar.db.password=${env:SCALAR_DL_AUDITOR_POSTGRES_PASSWORD}

          ### Auditor configurations
          scalar.dl.auditor.ledger.host=scalardl-ledger-envoy.default.svc.cluster.local
          scalar.dl.auditor.authentication.method=hmac
          scalar.dl.auditor.authentication.hmac.cipher_key=${env:SCALAR_DL_AUDITOR_HMAC_CIPHER_KEY}
          scalar.dl.auditor.servers.authentication.hmac.secret_key=${env:SCALAR_DL_AUDITOR_HMAC_SECRET_KEY}

          ### TLS configurations
          scalar.dl.auditor.server.tls.enabled=true
          scalar.dl.auditor.server.tls.cert_chain_path=/tls/scalardl-auditor/certs/tls.crt
          scalar.dl.auditor.server.tls.private_key_path=/tls/scalardl-auditor/certs/tls.key
          scalar.dl.auditor.tls.enabled=true
          scalar.dl.auditor.tls.ca_root_cert_path=/tls/scalardl-ledger/certs/ca.crt
          scalar.dl.auditor.tls.override_authority=envoy.scalar.example.com

          ### License key configurations
          scalar.dl.licensing.license_key=${env:SCALAR_DL_AUDITOR_LICENSE_KEY}
          scalar.dl.licensing.license_check_cert_pem=${env:SCALAR_DL_AUDITOR_LICENSE_CHECK_CERT_PEM}

        tls:
          enabled: true
          overrideAuthority: "auditor.scalardl.example.com"
          caRootCertSecret: "scalardl-auditor-tls-ca"
          certChainSecret: "scalardl-auditor-tls-cert"
          privateKeySecret: "scalardl-auditor-tls-key"
          caRootCertForLedgerSecret: "scalardl-auditor-tls-ca-for-ledger"

        secretName: "auditor-credentials-secret"
      EOF

    4. Create a secret resource named ledger-credentials-secret that includes credentials and a license key.

      kubectl create secret generic ledger-credentials-secret \
      --from-literal=SCALAR_DL_LEDGER_POSTGRES_USERNAME=postgres \
      --from-literal=SCALAR_DL_LEDGER_POSTGRES_PASSWORD=postgres \
      --from-literal=SCALAR_DL_LEDGER_HMAC_CIPHER_KEY=ledger-hmac-cipher-key \
      --from-literal=SCALAR_DL_LEDGER_HMAC_SECRET_KEY=scalardl-hmac-secret-key \
      --from-literal=SCALAR_DL_LEDGER_LICENSE_KEY="${SCALAR_DL_LEDGER_LICENSE_KEY}" \
      --from-file=SCALAR_DL_LEDGER_LICENSE_CHECK_CERT_PEM=<(echo ${SCALAR_DL_LEDGER_LICENSE_CHECK_CERT_PEM} | sed 's/\\n/\
      /g') \
      -n default

    5. Create a secret resource named auditor-credentials-secret that includes credentials and a license key.

      kubectl create secret generic auditor-credentials-secret \
      --from-literal=SCALAR_DL_AUDITOR_POSTGRES_USERNAME=postgres \
      --from-literal=SCALAR_DL_AUDITOR_POSTGRES_PASSWORD=postgres \
      --from-literal=SCALAR_DL_AUDITOR_HMAC_CIPHER_KEY=auditor-hmac-cipher-key \
      --from-literal=SCALAR_DL_AUDITOR_HMAC_SECRET_KEY=scalardl-hmac-secret-key \
      --from-literal=SCALAR_DL_AUDITOR_LICENSE_KEY="${SCALAR_DL_AUDITOR_LICENSE_KEY}" \
      --from-file=SCALAR_DL_AUDITOR_LICENSE_CHECK_CERT_PEM=<(echo ${SCALAR_DL_AUDITOR_LICENSE_CHECK_CERT_PEM} | sed 's/\\n/\
      /g') \
      -n default

    6. Create secret resources that include the private key and certificate files for Envoy.

      kubectl create secret generic envoy-tls-cert --from-file=tls.crt=${HOME}/scalardl-test/certs/envoy.pem -n default
      kubectl create secret generic envoy-tls-key --from-file=tls.key=${HOME}/scalardl-test/certs/envoy-key.pem -n default

    7. Create secret resources that include the private key, certificate, and CA certificate files for ScalarDL Ledger.

      kubectl create secret generic scalardl-ledger-tls-ca --from-file=ca.crt=${HOME}/scalardl-test/certs/ca.pem -n default
      kubectl create secret generic scalardl-ledger-tls-cert --from-file=tls.crt=${HOME}/scalardl-test/certs/ledger.pem -n default
      kubectl create secret generic scalardl-ledger-tls-key --from-file=tls.key=${HOME}/scalardl-test/certs/ledger-key.pem -n default

    8. Create secret resources that include the private key, certificate, and CA certificate files for ScalarDL Auditor.

      kubectl create secret generic scalardl-auditor-tls-ca --from-file=ca.crt=${HOME}/scalardl-test/certs/ca.pem -n default
      kubectl create secret generic scalardl-auditor-tls-cert --from-file=tls.crt=${HOME}/scalardl-test/certs/auditor.pem -n default
      kubectl create secret generic scalardl-auditor-tls-key --from-file=tls.key=${HOME}/scalardl-test/certs/auditor-key.pem -n default
      kubectl create secret generic scalardl-auditor-tls-ca-for-ledger --from-file=ca.crt=${HOME}/scalardl-test/certs/ca.pem -n default

    9. Create a secret resource named auditor-keys to disable the digital-signature authentication method. In this tutorial, you'll use the hmac authentication method instead of digital-signature.

      kubectl create secret generic auditor-keys \
        --from-literal=tls.key=dummy-data-to-disable-digital-signature-method \
        --from-literal=certificate=dummy-data-to-disable-digital-signature-method \
        -n default

      Note: If you use hmac as an authentication method, you have to create a dummy secret auditor-key to disable digital-signature on the helm chart side.

    10. Set the chart version of ScalarDL Ledger and ScalarDL Auditor.

      SCALAR_DL_LEDGER_CHART_VERSION=$(helm search repo scalar-labs/scalardl -l | grep -v -e "scalar-labs/scalardl-audit" | grep -F "${SCALAR_DL_VERSION}" | awk '{print $2}' | sort --version-sort -r | head -n 1)
      SCALAR_DL_AUDITOR_CHART_VERSION=$(helm search repo scalar-labs/scalardl-audit -l | grep -F "${SCALAR_DL_VERSION}" | awk '{print $2}' | sort --version-sort -r | head -n 1)

    11. Deploy ScalarDL Ledger.

      helm install scalardl-ledger scalar-labs/scalardl -f ${HOME}/scalardl-test/scalardl-ledger-custom-values.yaml --version ${SCALAR_DL_LEDGER_CHART_VERSION} -n default

    12. Deploy ScalarDL Auditor.

      helm install scalardl-auditor scalar-labs/scalardl-audit -f ${HOME}/scalardl-test/scalardl-auditor-custom-values.yaml --version ${SCALAR_DL_AUDITOR_CHART_VERSION} -n default

    13. Check if the ScalarDL Ledger and ScalarDL Auditor pods are deployed.

      kubectl get pod -n default

      [Command execution result]

      NAME                                         READY   STATUS      RESTARTS   AGE
      postgresql-auditor-0                         1/1     Running     0          14m
      postgresql-ledger-0                          1/1     Running     0          14m
      scalardl-auditor-auditor-5b885ff4c8-fwkpf    1/1     Running     0          18s
      scalardl-auditor-auditor-5b885ff4c8-g69cb    1/1     Running     0          18s
      scalardl-auditor-auditor-5b885ff4c8-nsmnq    1/1     Running     0          18s
      scalardl-auditor-envoy-689bcbdf65-5mn6v      1/1     Running     0          18s
      scalardl-auditor-envoy-689bcbdf65-fpq8j      1/1     Running     0          18s
      scalardl-auditor-envoy-689bcbdf65-lsz2t      1/1     Running     0          18s
      scalardl-ledger-envoy-547bbf7546-n7p5x       1/1     Running     0          26s
      scalardl-ledger-envoy-547bbf7546-p8nwp       1/1     Running     0          26s
      scalardl-ledger-envoy-547bbf7546-pskpb       1/1     Running     0          26s
      scalardl-ledger-ledger-6db5dc8774-5zsbj      1/1     Running     0          26s
      scalardl-ledger-ledger-6db5dc8774-vnmrw      1/1     Running     0          26s
      scalardl-ledger-ledger-6db5dc8774-wpjvs      1/1     Running     0          26s
      schema-loader-auditor-schema-loading-dvc5r   0/1     Completed   0          11m
      schema-loader-ledger-schema-loading-mtllb    0/1     Completed   0          11m

      If the ScalarDL Ledger and ScalarDL Auditor pods are deployed properly, the STATUS column for those pods will be displayed as Running.

    14. Check if the ScalarDL Ledger and ScalarDL Auditor services are deployed.

      kubectl get svc -n default

      [Command execution result]

      NAME                             TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)                         AGE
      kubernetes                       ClusterIP   10.96.0.1        <none>        443/TCP                         47d
      postgresql-auditor               ClusterIP   10.107.9.78      <none>        5432/TCP                        15m
      postgresql-auditor-hl            ClusterIP   None             <none>        5432/TCP                        15m
      postgresql-ledger                ClusterIP   10.108.241.181   <none>        5432/TCP                        15m
      postgresql-ledger-hl             ClusterIP   None             <none>        5432/TCP                        15m
      scalardl-auditor-envoy           ClusterIP   10.100.61.202    <none>        40051/TCP,40052/TCP             55s
      scalardl-auditor-envoy-metrics   ClusterIP   10.99.6.227      <none>        9001/TCP                        55s
      scalardl-auditor-headless        ClusterIP   None             <none>        40051/TCP,40053/TCP,40052/TCP   55s
      scalardl-auditor-metrics         ClusterIP   10.108.1.147     <none>        8080/TCP                        55s
      scalardl-ledger-envoy            ClusterIP   10.101.191.116   <none>        50051/TCP,50052/TCP             61s
      scalardl-ledger-envoy-metrics    ClusterIP   10.106.52.103    <none>        9001/TCP                        61s
      scalardl-ledger-headless         ClusterIP   None             <none>        50051/TCP,50053/TCP,50052/TCP   61s
      scalardl-ledger-metrics          ClusterIP   10.99.122.106    <none>        8080/TCP                        61s

      If the ScalarDL Ledger and ScalarDL Auditor services are deployed properly, you can see private IP addresses in the CLUSTER-IP column.

    note

    The CLUSTER-IP values for scalardl-ledger-headless, scalardl-auditor-headless, postgresql-ledger-hl, and postgresql-auditor-hl are None since they have no IP addresses.

    Step 7. Start a client container​

    You'll use the CA certificate file in a client container. Therefore, you'll need to create a secret resource and mount it to the client container.

    1. Create a secret resource named client-ca-cert.

      kubectl create secret generic client-ca-cert --from-file=ca.crt=${HOME}/scalardl-test/certs/ca.pem -n default

    2. Create a manifest file for a client pod (scalardl-client-pod.yaml).

      cat << 'EOF' > ${HOME}/scalardl-test/scalardl-client-pod.yaml
      apiVersion: v1
      kind: Pod
      metadata:
        name: "scalardl-client"
      spec:
        containers:
          - name: scalardl-client
            image: eclipse-temurin:8-jdk
            command: ['sleep']
            args: ['inf']
            env:
              - name: SCALAR_DL_VERSION
                value: SCALAR_DL_CLIENT_POD_SCALAR_DL_VERSION
            volumeMounts:
              - name: "client-ca-cert"
                mountPath: "/certs/"
                readOnly: true
        volumes:
          - name: "client-ca-cert"
            secret:
              secretName: "client-ca-cert"
        restartPolicy: Never
      EOF

    3. Set the ScalarDL version in the manifest file.

      sed -i s/SCALAR_DL_CLIENT_POD_SCALAR_DL_VERSION/${SCALAR_DL_VERSION}/ ${HOME}/scalardl-test/scalardl-client-pod.yaml

    4. Deploy the client pod.

      kubectl apply -f ${HOME}/scalardl-test/scalardl-client-pod.yaml -n default

    5. Check if the client container is running.

      kubectl get pod scalardl-client -n default

      [Command execution result]

      NAME              READY   STATUS    RESTARTS   AGE
      scalardl-client   1/1     Running   0          4s

    Step 8. Run ScalarDL sample contracts in the client container​

    The following explains the minimum steps needed to run sample contracts. For more details about ScalarDL Ledger and ScalarDL Auditor, see the following:

    1. Run bash in the client container.

      kubectl exec -it scalardl-client -n default -- bash

      The commands in the following steps must be run in the client container.

    2. Install the git, curl, and unzip commands in the client container.

      apt update && apt install -y git curl unzip

    3. Clone the ScalarDL Java Client SDK git repository.

      git clone https://github.com/scalar-labs/scalardl-java-client-sdk.git

    4. Change the working directory to scalardl-java-client-sdk/.

      cd scalardl-java-client-sdk/
      pwd

      [Command execution result]

      /scalardl-java-client-sdk

    5. Change the branch to the version you're using.

      git checkout -b v${SCALAR_DL_VERSION} refs/tags/v${SCALAR_DL_VERSION}

    6. Build the sample contracts.

      ./gradlew assemble

    7. Download the CLI tools for ScalarDL from ScalarDL Java Client SDK Releases.

      curl -OL https://github.com/scalar-labs/scalardl-java-client-sdk/releases/download/v${SCALAR_DL_VERSION}/scalardl-java-client-sdk-${SCALAR_DL_VERSION}.zip

      You need to use the same version of CLI tools and ScalarDL Ledger.

    8. Unzip the scalardl-java-client-sdk-${SCALAR_DL_VERSION}.zip file.

      unzip ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}.zip

    9. Create a configuration file named client.properties to access ScalarDL Ledger and ScalarDL Auditor on the Kubernetes cluster.

      cat << 'EOF' > client.properties
      # Ledger configuration
      scalar.dl.client.server.host=scalardl-ledger-envoy.default.svc.cluster.local
      scalar.dl.client.tls.enabled=true
      scalar.dl.client.tls.ca_root_cert_path=/certs/ca.crt
      scalar.dl.client.tls.override_authority=envoy.scalar.example.com

      # Auditor configuration
      scalar.dl.client.auditor.enabled=true
      scalar.dl.client.auditor.host=scalardl-auditor-envoy.default.svc.cluster.local
      scalar.dl.client.auditor.tls.enabled=true
      scalar.dl.client.auditor.tls.ca_root_cert_path=/certs/ca.crt
      scalar.dl.client.auditor.tls.override_authority=envoy.scalar.example.com

      # Client configuration
      scalar.dl.client.authentication_method=hmac
      scalar.dl.client.entity.id=client
      scalar.dl.client.entity.identity.hmac.secret_key=scalardl-hmac-client-secert-key
      EOF

    10. Register the client secret.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl register-secret --config ./client.properties

    11. Register the sample contract StateUpdater.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl register-contract --config ./client.properties --contract-id StateUpdater --contract-binary-name com.org1.contract.StateUpdater --contract-class-file ./build/classes/java/main/com/org1/contract/StateUpdater.class

    12. Register the sample contract StateReader.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl register-contract --config ./client.properties --contract-id StateReader --contract-binary-name com.org1.contract.StateReader --contract-class-file ./build/classes/java/main/com/org1/contract/StateReader.class

    13. Register the contract ValidateLedger to execute a validate request.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl register-contract --config ./client.properties --contract-id validate-ledger --contract-binary-name com.scalar.dl.client.contract.ValidateLedger --contract-class-file ./build/classes/java/main/com/scalar/dl/client/contract/ValidateLedger.class

    14. Execute the contract StateUpdater.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl execute-contract --config ./client.properties --contract-id StateUpdater --contract-argument '{"asset_id": "test_asset", "state": 3}'

      This sample contract updates the state (value) of the asset named test_asset to 3.

    15. Execute the contract StateReader.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl execute-contract --config ./client.properties --contract-id StateReader --contract-argument '{"asset_id": "test_asset"}'

      [Command execution result]

      Contract result:
      {
        "id" : "test_asset",
        "age" : 0,
        "output" : {
          "state" : 3
        }
      }

      Reference​

      • If the asset data is not tampered with, running the execute-contract command to request contract execution will return OK as a result.

      • If the asset data is tampered with (for example, if the state value in the database is tampered with), running the execute-contract command to request contract execution will return a value other than OK (for example, INCONSISTENT_STATES) as a result. See the following as an example for how ScalarDL detects data tampering.

        [Command execution result (if the asset data is tampered with)]

        {
          "status_code" : "INCONSISTENT_STATES",
          "error_message" : "The results from Ledger and Auditor don't match"
        }

    16. Execute a validation request for the asset.

      ./scalardl-java-client-sdk-${SCALAR_DL_VERSION}/bin/scalardl validate-ledger --config ./client.properties --asset-id "test_asset"

      [Command execution result]

      {
        "status_code" : "OK",
        "Ledger" : {
          "id" : "test_asset",
          "age" : 0,
          "nonce" : "3533427d-03cf-41d1-bf95-4d31eb0cb24d",
          "hash" : "FiquvtPMKLlxKf4VGoccSAGsi9ptn4ozYVVTwdSzEQ0=",
          "signature" : "MEYCIQDiiXqzw6K+Ml4uvn8rK43o5wHWESU3hoXnZPi6/OeKVwIhAM+tFBcapl6zg47Uq0Uc8nVNGWNHZLBDBGve3F0xkzTR"
        },
        "Auditor" : {
          "id" : "test_asset",
          "age" : 0,
          "nonce" : "3533427d-03cf-41d1-bf95-4d31eb0cb24d",
          "hash" : "FiquvtPMKLlxKf4VGoccSAGsi9ptn4ozYVVTwdSzEQ0=",
          "signature" : "MEUCIQDLsfUR2PmxSvfpL3YvHJUkz00RDpjCdctkroZKXE8d5QIgH73FQH2e11jfnynD00Pp9DrIG1vYizxDsvxUsMPo9IU="
        }
      }

      Reference​

      • If the asset data is not tampered with, running the validate-ledger command to request validation will return OK as the result.

      • If the asset data is tampered with (for example, if the state value in the database is tampered with), running the validate-ledger command to request validation will return a value other than OK (for example, INVALID_OUTPUT) as a result. See the following as an example for how ScalarDL detects data tampering.

        [Command execution result (if the asset data is tampered with)]

        {
          "status_code" : "INCONSISTENT_STATES",
          "error_message" : "The results from Ledger and Auditor don't match"
        }

    17. Exit from the client container.

      exit

    Step 9. Delete all resources​

    After completing the ScalarDL Ledger and ScalarDL Auditor tests on the Kubernetes cluster, remove all resources.

    1. Uninstall ScalarDL Ledger, ScalarDL Auditor, ScalarDL Schema Loader, and PostgreSQL.

      helm uninstall -n default scalardl-ledger schema-loader-ledger postgresql-ledger scalardl-auditor schema-loader-auditor postgresql-auditor

    2. Remove the client container.

      kubectl delete pod scalardl-client --grace-period 0 -n default

    3. Remove the secret resources.

      kubectl delete secrets envoy-tls-key envoy-tls-cert schema-ledger-credentials-secret schema-auditor-credentials-secret ledger-credentials-secret scalardl-ledger-tls-ca scalardl-ledger-tls-cert scalardl-ledger-tls-key auditor-credentials-secret auditor-keys scalardl-auditor-tls-ca scalardl-auditor-tls-cert scalardl-auditor-tls-key scalardl-auditor-tls-ca-for-ledger client-ca-cert

    4. Remove the working directory and sample files (configuration file, private key, and certificate).

      cd ${HOME}
      rm -rf ${HOME}/scalardl-test/

    Further reading​

    You can see how to get started with monitoring or logging for Scalar products in the following tutorials: