Developer Guide for ScalarDB Cluster with the Java API

ScalarDB Cluster provides a Java API for developing applications. This document explains how to use the Java API.

Add ScalarDB Cluster Java Client SDK to your build

The ScalarDB Cluster Java Client SDK is available in the Maven Central Repository.

To add a dependency on the ScalarDB Cluster Java Client SDK by using Gradle, use the following:

dependencies {
    implementation 'com.scalar-labs:scalardb-cluster-java-client-sdk:3.13.1'
}

To add a dependency by using Maven, use the following:

<dependency>
  <groupId>com.scalar-labs</groupId>
  <artifactId>scalardb-cluster-java-client-sdk</artifactId>
  <version>3.13.1</version>
</dependency>

Client modes

The ScalarDB Cluster Java Client SDK supports two client modes: indirect and direct-kubernetes. The following describes the client modes.

indirect client mode

This mode simply sends a request to any cluster node (typically via a load balancer, such as Envoy), and the cluster node receiving the request routes the request to the appropriate cluster node that has the transaction state.

The advantage of this mode is that we can keep the client thin. The disadvantage is that we need an additional hop to reach the correct cluster node, which may affect performance.

You can use this connection mode even if your application is running on a different Kubernetes cluster and your application can't access the Kubernetes API and each cluster node. If your application is running on the same Kubernetes cluster as your ScalarDB Cluster nodes, you can use the direct-kubernetes client mode.

direct-kubernetes client mode

In this mode, the client uses the membership logic (using the Kubernetes API) and the distribution logic (consistent hashing algorithm) to find the right cluster node that has the transaction state. The client then sends a request to the cluster node directly.

The advantage of this mode is that we can reduce the hop count to reach the proper cluster node, which will improve the performance. The disadvantage of this mode is that we need to make the client fat because the client needs to have membership logic and request-routing logic.

Since this connection mode needs to access the Kubernetes API and each cluster node, you can use this connection mode only if your application is running on the same Kubernetes cluster as your ScalarDB Cluster nodes. If your application is running on a different Kubernetes cluster, use the indirect client mode.

For details about how to deploy your application on Kubernetes with direct-kubernetes client mode, see Deploy your client application on Kubernetes with direct-kubernetes mode.

ScalarDB Cluster Java API

The ScalarDB Cluster Java Client SDK provides a Java API for applications to access ScalarDB Cluster. The following diagram shows the architecture of the ScalarDB Cluster Java API.

  +------------------+
  | User/Application |
  +------------------+
           ↓ Java API
    +--------------+
    | ScalarDB API |
    +--------------+
           ↓ gRPC
  +------------------+
  | ScalarDB Cluster |
  +------------------+
           ↓ DB vendor–specific protocol
         +----+
         | DB |
         +----+

Using the ScalarDB Cluster Java API is almost the same as using the ScalarDB Java API except the client configurations and Schema Loader are different. For details, see ScalarDB Java API Guide.

The following section describes the client configurations for the ScalarDB Cluster Java API and Schema Loader for Cluster.

Client configurations

The following table shows the client configurations for the ScalarDB Cluster Java API.

Name	Description	Default
scalar.db.transaction_manager	cluster should be specified.	-
scalar.db.contact_points	Contact point of the cluster. If you use the indirect client mode, specify the IP address of the load balancer in front of your cluster nodes by using the format indirect:<the load balancer IP address>. If you use the direct-kubernetes client mode, specify the namespace name (optional) and the name of the endpoint resource to get the membership information by using the format direct-kubernetes:<namespace name>/<endpoint name> or just direct-kubernetes:<endpoint name>. If you don't specify the namespace name, the client will use the default namespace.
scalar.db.contact_port	Port number for the contact point.	60053
scalar.db.cluster.grpc.deadline_duration_millis	Deadline duration for gRPC in millis.	60000 (60 seconds)
scalar.db.cluster.grpc.max_inbound_message_size	Maximum message size allowed for a single gRPC frame.	The gRPC default value
scalar.db.cluster.grpc.max_inbound_metadata_size	Maximum size of metadata allowed to be received.	The gRPC default value

For example, if you use the indirect client mode and the load balancer IP address is 192.168.10.1, you can configure the client as follows:

scalar.db.transaction_manager=cluster
scalar.db.contact_points=indirect:192.168.10.1

Or if you use the direct-kubernetes client mode, with the namespace of the endpoint as ns and the endpoint name as scalardb-cluster, you can configure the client as follows:

scalar.db.transaction_manager=cluster
scalar.db.contact_points=direct-kubernetes:ns/scalardb-cluster

Schema Loader for Cluster

To load a schema via ScalarDB Cluster, you need to use the dedicated Schema Loader for ScalarDB Cluster (Schema Loader for Cluster). Using the Schema Loader for Cluster is basically the same as using the ScalarDB Schema Loader except the name of the JAR file is different. You can download the Schema Loader for Cluster from ScalarDB Releases. After downloading the JAR file, you can run Schema Loader for Cluster with the following command:

java -jar scalardb-cluster-schema-loader-3.13.1-all.jar --config <PATH_TO_CONFIG_FILE> -f <PATH_TO_SCHEMA_FILE> --coordinator

ScalarDB Cluster SQL

ScalarDB Cluster SQL can be accessed via JDBC and Spring Data JDBC for ScalarDB in Java as follows:

  +-----------------------------------------+
  |            User/Application             |
  +-----------------------------------------+
         ↓                    ↓ Java API
Java API ↓     +-------------------------------+
 (JDBC)  ↓     | Spring Data JDBC for ScalarDB |
         ↓     +-------------------------------+
+----------------------------------------------+
|         ScalarDB JDBC (ScalarDB SQL)         |
+----------------------------------------------+
                    ↓ gRPC
         +----------------------+
         | ScalarDB Cluster SQL |
         +----------------------+
                    ↓ DB vendor–specific protocol
                  +----+
                  | DB |
                  +----+

This section describes how to use ScalarDB Cluster SQL though JDBC and Spring Data JDBC for ScalarDB.

ScalarDB Cluster SQL via JDBC

Using ScalarDB Cluster SQL via JDBC is almost the same using ScalarDB JDBC except for how to add the JDBC driver to your project.

In addition to adding the ScalarDB Cluster Java Client SDK as described in Add ScalarDB Cluster Java Client SDK to your build, you need to add the following dependencies to your project:

To add the dependencies on the ScalarDB Cluster JDBC driver by using Gradle, use the following:

dependencies {
    implementation 'com.scalar-labs:scalardb-sql-jdbc:3.13.1'
    implementation 'com.scalar-labs:scalardb-cluster-java-client-sdk:3.13.1'
}

To add the dependencies by using Maven, use the following:

<dependencies>
    <dependency>
        <groupId>com.scalar-labs</groupId>
        <artifactId>scalardb-sql-jdbc</artifactId>
        <version>3.13.1</version>
    </dependency>
    <dependency>
        <groupId>com.scalar-labs</groupId>
        <artifactId>scalardb-cluster-java-client-sdk</artifactId>
        <version>3.13.1</version>
    </dependency>
</dependencies>

Other than that, using ScalarDB Cluster SQL via JDBC is the same as using ScalarDB JDBC. For details about ScalarDB JDBC, see ScalarDB JDBC Guide.

ScalarDB Cluster SQL via Spring Data JDBC for ScalarDB

Similar to ScalarDB Cluster SQL via JDBC, using ScalarDB Cluster SQL via Spring Data JDBC for ScalarDB is almost the same as using Spring Data JDBC for ScalarDB except for how to add it to your project.

In addition to adding the ScalarDB Cluster Java Client SDK as described in Add ScalarDB Cluster Java Client SDK to your build, you need to add the following dependencies to your project:

To add the dependencies by using Gradle, use the following:

dependencies {
    implementation 'com.scalar-labs:scalardb-sql-spring-data:3.13.1'
    implementation 'com.scalar-labs:scalardb-cluster-java-client-sdk:3.13.1'
}

To add the dependencies by using Maven, use the following:

<dependencies>
    <dependency>
        <groupId>com.scalar-labs</groupId>
        <artifactId>scalardb-sql-spring-data</artifactId>
        <version>3.13.1</version>
    </dependency>
    <dependency>
        <groupId>com.scalar-labs</groupId>
        <artifactId>scalardb-cluster-java-client-sdk</artifactId>
        <version>3.13.1</version>
    </dependency>
</dependencies>

Other than that, using ScalarDB Cluster SQL via Spring Data JDBC for ScalarDB is the same as using Spring Data JDBC for ScalarDB. For details about Spring Data JDBC for ScalarDB, see Guide of Spring Data JDBC for ScalarDB.

ScalarDB Cluster SQL client configurations

The following table shows the configurations for ScalarDB Cluster SQL.

Name	Description	Default
scalar.db.sql.connection_mode	cluster should be specified.	-
scalar.db.sql.cluster_mode.contact_points	Contact point of the cluster. If you use the indirect client mode, specify the IP address of the load balancer in front of your cluster nodes by using the format indirect:<the load balancer IP address>. If you use the direct-kubernetes client mode, specify the namespace name (optional) and the name of the endpoint resource to get the membership information by using the format direct-kubernetes:<namespace name>/<endpoint name> or just direct-kubernetes:<endpoint name>. If you don't specify the namespace name, the client will use the default namespace.
scalar.db.sql.cluster_mode.contact_port	Port number for the contact point.	60053
scalar.db.sql.default_transaction_mode	Default transaction mode. TRANSACTION or TWO_PHASE_COMMIT_TRANSACTION can be set.	TRANSACTION
scalar.db.sql.default_namespace_name	Default namespace name. If you don't specify a namespace name in your SQL statement, this value is used.
scalar.db.cluster.grpc.deadline_duration_millis	Deadline duration for gRPC in millis.	60000 (60 seconds)
scalar.db.cluster.grpc.max_inbound_message_size	Maximum message size allowed for a single gRPC frame.	The gRPC default value
scalar.db.cluster.grpc.max_inbound_metadata_size	Maximum size of metadata allowed to be received.	The gRPC default value

For example, if you use the indirect client mode and the load balancer IP address is 192.168.10.1, you can configure the client as follows:

scalar.db.sql.connection_mode=cluster
scalar.db.sql.cluster_mode.contact_points=indirect:192.168.10.1

Or if you use the direct-kubernetes client mode, with the namespace of the endpoint as ns and the endpoint name as scalardb-cluster, you can configure the client as follows:

scalar.db.sql.connection_mode=cluster
scalar.db.sql.cluster_mode.contact_points=direct-kubernetes:ns/scalardb-cluster

For details about how to configure ScalarDB JDBC, see JDBC connection URL.

For details about how to configure Spring Data JDBC for ScalarDB, see Configurations.

SQL CLI

Like other SQL databases, ScalarDB SQL also provides a CLI tool where you can issue SQL statements interactively in a command-line shell.

You can download the SQL CLI for Cluster from ScalarDB Releases. After downloading the JAR file, you can run the SQL CLI with the following command:

java -jar scalardb-cluster-sql-cli-3.13.1-all.jar --config <PATH_TO_CONFIG_FILE>

Usage

You can see the CLI usage with the -h option as follows:

java -jar scalardb-cluster-sql-cli-3.13.1-all.jar -h
Usage: scalardb-sql-cli [-hs] -c=PROPERTIES_FILE [-e=COMMAND] [-f=FILE]
                        [-l=LOG_FILE] [-o=<outputFormat>] [-p=PASSWORD]
                        [-u=USERNAME]
Starts ScalarDB SQL CLI.
  -c, --config=PROPERTIES_FILE
                            A configuration file in properties format.
  -e, --execute=COMMAND     A command to execute.
  -f, --file=FILE           A script file to execute.
  -h, --help                Display this help message.
  -l, --log=LOG_FILE        A file to write output.
  -o, --output-format=<outputFormat>
                            Format mode for result display. You can specify
                              table/vertical/csv/tsv/xmlattrs/xmlelements/json/a
                              nsiconsole.
  -p, --password=PASSWORD   A password to connect.
  -s, --silent              Reduce the amount of informational messages
                              displayed.
  -u, --username=USERNAME   A username to connect.

Further reading

If you want to use ScalarDB Cluster in programming languages other than Java, you can use the ScalarDB Cluster gRPC API. For details about the ScalarDB Cluster gRPC API, refer to the following:

• ScalarDB Cluster gRPC API Guide
• ScalarDB Cluster SQL gRPC API Guide

JavaDocs are also available:

• ScalarDB Cluster Java Client SDK
• ScalarDB Cluster Common
• ScalarDB Cluster RPC